Glossary entry (derived from question below)
Croatian term or phrase:
čvrstoća okomito na vlakna
English translation:
strength perpendicular to the fiber direction (in the direction perpendicular to the fibers)
Added to glossary by
V&M Stanković
Nov 20, 2008 18:41
15 yrs ago
1 viewer *
Croatian term
čvrstoća okomito na vlakna
Croatian to English
Tech/Engineering
Construction / Civil Engineering
Ispitivanjem je utvrđeno da uzorkovani ostaci drvenog roštilja imaju trenutnu prosječnu čvrstoću okomito na vlakna 3,95 MN/M2, a paralelno sa vlaknima 7,97 MN/m2.
Proposed translations
(English)
5 +4 | strength perpendicular to the fiber direction (in the direction perpendicular to the fibers) | V&M Stanković |
4 | strength transverse to fibres | Mira Stepanovic |
Change log
Nov 26, 2008 00:06: V&M Stanković Created KOG entry
Proposed translations
+4
47 mins
Selected
strength perpendicular to the fiber direction (in the direction perpendicular to the fibers)
Japan Society of Civil Engineers
A Bridge Made of Wood
...
Among various strengths in the direction of the fiber, tension is the largest, next is bending, and compression is about 1/3 ~ 2/3 of the tension.
...
On the other hand, values of Young’s modulus and the tension strength, perpendicular to the fiber direction are about 1/10 ~ 1/20 of those in the fiber direction.
( http://www.jsce-int.org/civil_engineering/2005/1-2.pdf )
“Louisiana State University
...
The balsa wood has a fairly low modulus and strength in the direction perpendicular to the fibers, whereas the modulus and strength parallel to the fiber direction are relatively high.”
( http://etd.lsu.edu/docs/available/etd-04292004-103556/unrest... )
4 KudoZ points awarded for this answer.
Comment: "Hvala Vesna"
16 mins
strength transverse to fibres
http://cat.inist.fr/?aModele=afficheN&cpsidt=3678418
The strength transverse to the fibre (or the transverse fracture strain) of CFRP is directly related to the fibre/matrix bond strength.
The strength transverse to the fibre (or the transverse fracture strain) of CFRP is directly related to the fibre/matrix bond strength.
Something went wrong...